Short description: 
- Real-Time Code
Execution Without Probes Works with All
Packages
- Standard Chip
Used No Bondouts, 100% Electrical Characteristics
Guaranteed
- STVD7 Source Level
Debugger
- Built-In ISP
Programmer
- Includes
inDART-ST72C/SK
+ Evaluation Board with a Sample ST72C254
Microcontroller
 Back to top
inDART-ST72C254 is a package that includes an
inDART-ST72C254 debugger/programmer, supporting the whole
STMicroelectronics ST72C family, and an evaluation board,
built for the ST72C254 microcontroller. inDART-ST72C254
In-Circuit Debugger takes advantage of STMicroelectronics'
STVD7 (STMicroelectronics Visual Debug) Integrated Development
Environment and the ISP (In Situ Programming) feature to
program the FLASH memory of the ST7C family of
microcontrollers. Together with STVD7, inDART-ST72C254
In-Circuit Debugger provides you with everything you need to
write, compile, download, in-circuit emulate and debug user
code. Full-speed program execution allows you to perform
hardware and software testing in real time. inDART-ST72C254
In-Circuit Debugger is connected to the host PC through a
parallel port, while the 10-pin probe of the debuggers fit
into the target's standard ISP connector.
Evaluation Board
A
full-featured evaluation board for STMicroelectronics ST72C254
(in SDIP32 package) microcontroller is included. The
evaluation board includes DIP-switches, jumpers, LEDs,
push-buttons, a potentiometer, prototyping area and a standard
ISP connector and can be used for evaluation/experiments in
the absence of a target application board.
Back to top
What is
In-System Programming (ISP)?
ISP programming uses a serial protocol to
interface a programming tool like inDART. The ISP feature can
be implemented with a minimum number of added components and
board area impact. inDART-ST7 uses the standard, 10-pin ST7
ISP connector to program and in-circuit emulate the target
device. The ISP feature allows users to update the content of
the FLASH program memory while the device is plugged into or
soldered to the application board-device removal is not
necessary. Likewise, during debugging, the very same target
device mounted in the application board is used.
STVD7
Integrated Development Environment
The inDART-ST7 user interface is based on the
STMicroelectronics' ST7 Visual Debug Integrated Development
Environment (STVD7). STVD7 enables programs to be executed and
stopped where desired, while viewing the memory contents. It
offers the ability to step through and examine code at the C
source level and the Assembly instruction level. You can
introduce breakpoints and run or single-step the executable,
while viewing the source and observing current program values.
All registers and memory locations are accessible for both
read and write operations.
Back to top
Programming Library
(DLL)
The optional IPL-ST7 Programming Library is a
DLL which includes all of the low-level functions that allow
users to set up the instrument and perform, from within their
own Windows application, most of the programming commands and
functions of the DataBlaze user interface. The IPL-ST7
Programming Library contains C written routines, and can be
used to interface the instrument from within, for example, a
Microsoft Visual C or Visual Basic application, as well as any
other programming language that supports the DLL mechanism.
The IPL-ST7 Programming Library can be purchased both as an
accessory to every instrument of the inDART-ST7 series and
inDART-STX for ST7 series, or separately. Full documentation
and examples are included. An USB software protection key is
provided with every copy of IPL-ST7: the protection key must
be plugged into any USB port on the PC where the library
functions of IPL-ST7 are used.
Back to top
Supported devices
- ST72C104
- ST72C215
- ST72C216
- ST72C254
At a
Glance
- Debugging
Capabilities: Unlimited Number of Breakpoints;
Source Level Debugging
- Programming
Capabilities: ISP
Programming; Full Option Bytes Control; DataBlaze
Programming Utility Included
- Compilers:
Assembler; Cosmic and Metrowerks
(ex-Hiware) C Compilers Supported
- Software: Windows 9x/2000/NT/XP
Compatible
- Communication: Parallel Connection to the Host
PC, ISP Connection to the Target Board
- Power Supply: Provided by the Target Board
through the ISP Connector
Accessories
- IPL-ST7 inDART Programming Library (DLL)
with USB Software Protection Key
Back to top
Prices:
- Emulator
inDART-ST72C254 € 248,97 zzgl. MWSt.
- IPL-ST7 inDART €
360,00 zzgl. MWSt.
Emulator price also includes
- free technical support (hot line)
- free life-time software update via Internet
|
